Rocket Double Pocket Door Kit

£335.88
Qty

Match your Dor size to its matching kit
All manuactured to match standard UK door sizes

Choosing The Correct Kit To Match Your Studwork

• 70mm Frame Kit = 3 x 2 63mm CLS or 70mm Steel stud
• 75mm Frame Kit = 3 x 2 75mm Rough Sawn
• 90mm Frame Kit = 4 x 2 90mm CLS, or 92mm Steel stud

White Primed MDF Jamb Lining Kit:
Lines the reveal to narrow the pocket void down to a neat slot just wide enough for the door to slide through .
to give your installation that flawless finishing touch

Adding soft close ensures your door glides gently into place, preventing slamming and reducing wear over time.

2 complete galvanised steel pocket and integral running track, both corrosion resistant.

2 sets of runners each having two 'sealed for life' carbon steel bearing wheel that are contained within the track and cannot 'jump' off the rails.

2 spring steel braking system is included as standard and brakes the door closure under normal usage.

Door brackets to attach the door to the runners, these have the possibility to adjust up to 7mm so your door can be at the perfect height (remember to always install your frame at finished floor level)

Included also are 19mm plasterboard screws for attaching your plasterboard to the framework. These are important as they are just the right size to attach the board and not protrude too much with the risk of scratching your door.

A full 12 year warranty against manufacturing and material defects.

DOUBLE POCKET KITS
Its so easy, Our Pocket system has an adaptable bracket that is used to connect two singles and make them a double so there is no extra cost for a joining kit. When Installing a double system remember to ensure both systems are perfectly in line and plumb and then the doors will meet exactly in the middle.

Please make sure you choose the right kit as returns incur return & restocking costs. See Technical Info for more Pocket Door help.

What Do You Get With The Kit

2 complete galvanised steel pocket and integral running track, both corrosion resistant.
2 sets of runners each having two 'sealed for life' carbon steel bearing wheel that are contained within the track and cannot 'jump' off the rails.
2 spring steel braking system is included as standard and brakes the door closure under normal usage.
Door brackets to attach the door to the runners, these have the possibility to adjust up to 7mm so your door can be at the perfect height (remember to always install your frame at finished floor level)
Included also are 19mm plasterboard screws for attaching your plasterboard to the framework. These are important as they are just the right size to attach the board and not protrude too much with the risk of scratching your door.
A full 12 year warranty against manufacturing and material defects.

So that's it, everything you need to make a double doors of your choice into a pocket doors. You need only supply the door, plasterboard and any wood linings you choose.

You May Also Like...